A reliable, heavy duty belt sander that you can count on for consistent quality is a must when it comes to knife making. Ideally, you want an adequate sized belt and disk sander that can perform many tasks as well as sharpen several sharp edge tools. The following products are a few of the best available belt sanders for knife making on the market today.
Table of Contents
3 Best Belt Sanders for Knife Making
1. Kalamazoo 1SM
The Kalamazoo 1SM is an impressive piece of machinery that sharpens edge tools in just a few minutes of your time. It also gives you the ability to shape and sand many different types of materials with its one inch wide surface on the belt. These features make it an ideal tool when it comes to knife making. It also works on plastic, wood, and composites. You can use it as a portable sander or it can be bolted in place. The spring tension rollers give you a consistent belt tension as well as tracking while you are working.
Along with knife making, knives, chisels, and other tools can be sharpened nicely on the Kalamazoo 1SM’s 42 inch aluminum oxide belt. It comes with your purchase, and can be changed within 30 seconds. The adjustable tilt table and tool rest measures three inches by three inches. The entire device weighs in at 32 pounds, and it comes with a 1/3 HP 115V motor. It reaches speeds of 1,725 RPM. The eight foot cord gives you plenty of flexibility in where it can be used.
Over 90% of the online reviews for this belt sander give it the highest possible rating. Those who own this machine state that it is significantly better than other similar models. The motor is made in America, and it is sealed so that the abrasive dust coming from your project won’t harm it. Fan cooled, it has plenty of power for any knife making task. The 100 grit belt that comes with it removes a lot of material in a short amount of time. Very little vibration is found in this sander, and the noise level is minimal.
2. Grizzly H6070
The Grizzly H6070 can do many things, including contour sanding, sanding intricate parts, and dry sharpening. It combines a bench top sander and a one inch by 30 inch belt sander along with a five inch disk sander in one convenient, portable device. The disk sanding table and the belt both tilt up to 45 degrees giving you plenty of versatility. Contour sanding is simple due to the idler roller guard and the removable belt platen.
Features that you will find with the Grizzly H6070 include a 1/3 HP motor with 110V single phase 3450 RPM. You’ll also find it has a tracking adjustment as well as direct drive. There are two dust ports, each measuring 1 ¾ inches. This particular machine uses five inch PSA disks and standard one by 30 inch belts. The belts on this device are fairly easy to change. You’ll simply release the tension to take the old belt off and put the new one in place. The disks can be a little more difficult to remove due to the adhesive back, but most owners do not find this to be a big problem.
Online reviews show this to be a very good piece for anyone interested in knife making. It won’t stop if the belt is pressed to hard, and the motor doesn’t choke during continued use. Many state that it has lots of power while remaining fairly quiet to run. Those who have found space to be an issue enjoy the compact size of this particular machine without having to give up the power they need.
This belt sander for knife making has a total weight of 20.1 pounds. The machine itself is 12.5 X 16.7 X 11.5 inches while the belt sander’s table measures 5 1/8 inches by 5 1/8 inches while the disc sander’s table comes four inches by 7 5/16 inches. The platen is one inch by three inches. A one year warranty is included, and it is manufactured in China for the Grizzly Company.
- 1/3 HP, 110V, single-phase, 3450 RPM motor
- Both belt and disc sanding tables tilt 45 degrees
- Belt sander table size, 5-1/8" x 5-1/8"
- Disc sander table size, 4" x 7-5/16"
- Removable belt platen and idler roller guard
3. JET J-4002
The JET J-4002 belt sander has a power take off that allows you to mount an optional flex shaft for drum sanding, carving, and deburring. This abrasive belt sander can do the work of a coping saw, jig saw, and hand file. It removes excess material and finishes the piece all in one step. You’ll find it allows you to reach into smaller spaces as well as handle angles and odd shapes. The deluxe miter gauge can be turned and locked either left or right at a 45 degree angle. It comes with a one inch by 42 inch belt and an eight inch wheel.
The JET J-4002 measures 21 by 22 by 14 inches. It has a belt speed of 3,000 feet per minute, and is precision built. It is designed to last with quality, reliable engineering. This particular machine has been tested for tight tolerance standards that ensure you are getting consistent quality. Each of these belt sanders comes with a two year warranty.
The entire machine measures 21 by 22 by 14 inches and weighs 62 pounds. It is a substantial piece with a 1/3 HP, 115V, phase 1 motor. The disk reaches speeds of 1,725 RPM, and the belt is one inch by 14 inches with 5/8 inch table slots.
Online reviews describe the JET J-4002 as being very simple to set up. It is heavy duty, and lasts over a long period of time. It can even handle the daily eight hours of abuse found in shop classes. Many state that it works perfectly for knife making tasks. It has lots of power and remains quiet to run. Owners often mention that they have ended up using it for much more than they had expected to.
- Hinged idler wheel cover. Horse power: 1/3HP, 115VAC, 1ph
- Power take off allows for mounting an optional flex shaft for carving, drum sanding, deburing, and more
- Deluxe miter gauge turns and locks for common angles, 45 degrees left and right
- Abrasive belt unit does the work of a jig-saw, copying saw or hand file while removing material and finishing at the same time
- Removable platen allows for sanding, grinding, or finishing of outside curves or odd shaped work pieces on the belt
Belt Sander For Knife Making Video
If you are new to knife making here is a handy YouTube video explaining how to use one when making knives: